Leaking pipes in walls: How to identify and fix
Who hasn’t experienced leaks on the wall? If it is visible, it starts with a very small water stain and increases until it takes over the wall. Now, if not, you will notice the difference in the water bill.
Knowing how to identify and fix this type of problem can be very timely; after all, the pipe doesn’t choose the day it will drill. If it happens on weekends or holidays, for example, it is difficult to find a professional plumber to do the repairs. Result? The damage can be much greater.
This type of accident is often caused by lack of care when installing hydraulics. When this part of the service is not serious, it is a matter of time before the problem appears. Starting to treat you by purchasing quality plumbing materials is the first step to having leak-free walls.
How to tell if there is a leak in the plumbing
The simplest way to determine if there is a leak in the pipeline is to take a suction test. It is simple:
– Close the register in the hydrometer – where the water reaches the property;
– Open the tap directly connected to the street, and furthest from the register (usually from the laundry), and let out all the water that is in the pipe;
– Take a full glass of water and place it in the mouth of the open faucet;
– If the faucet sucks water, there is a leak in the piping.
Another way to identify a leak in the pipe is to close all the faucets in the property and check if the record still makes some kind of measurement. If this happens, there is most likely a leak.
It could also be that the problem is in the water tank. In this case, identifying potential leaks is a matter of observation. To make it easier, close the register on the hydrometer and mark the current water level. Wait approximately two hours without using taps or flushing. After that time, see if the water level has decreased. If so, there is a leak.
As you can see, identifying if there is a leak is easy: the real problem is figuring out where it is. If it’s in the pipe, it’s probably hidden away – and that makes it very difficult to determine the exact location of the problem.
However, there are other indicators that can be observed at the leak site that cause changes in walls and grounds. Are they:
- Ink resting;
- Wall with wet cement or easily loosening;
- Wall mold;
- Ceramics dropping.
- Are any of these items keeping you awake? Better take care of them quickly before the damage gets worse.
Fixing water leaks in pipes
After locating where the leak is, turn off the main valve in your house and open the taps to drain the water that is already in the pipe.
If the pipes are cracked, it is possible to stop the leak by replacing the defective part. You can also use a good sealing kit, such as Fitadura, one of the best selling items on our website. Know more about plumber
This kit, made with glass resin or plastic glue, completely seals the leak. For good result, apply the product according to the manufacturer’s specification.
When the leak is located in a pipe joint, dry the area thoroughly, apply putty around the leak and let it dry.
If the leak is very large, or you don’t know where it is located, call a professional plumber to fix the problem.
Another tip is to handle the plumbing with care, as it is usually very sensitive, and a poor repair can result in even bigger problems than the initial one.
We know that leaks in pipes cause great inconvenience, especially if there is no professional plumber available at that time. The suggestion to avoid leaks is to choose quality piping before starting the work.
However, if the problem has already happened, use a good sealing product so that the leak doesn’t bother you again. And, if you need innovation in your construction, count on us.