How to identify a leak in the bathroom?

| |

How to identify a leak in the bathroom?

Before you despair when you discover a leak in the bathroom, know that there are super practical and objective solutions to help your bricklayer break in the right place, reducing the cost of repairs and materials acquisition.

That’s right! Forget about the endless break until you find the leak point.

 

How does a bathroom piping work?

To know the source of a leak, it is necessary to understand how the piping in a bathroom works:

on the walls are distributed the pipes that lead the water to the consumption points, which are the faucets, shower and toilet;
on the floor are the used water drain pipes.

So, can we deduce that leaks in the sewer pipe will only appear on the ceiling or walls of the neighbor below? Exactly!

However, leaks in the water distribution pipe can appear on its walls and also on the walls of the apartment below.

 

Where is the leak manifesting?

Normally, when a leak appears in your own apartment, repair is easier, as it is visually located, just breaking in the same place.

 

However, when the leak in the bathroom occurs in the downstairs neighbor, it is much more difficult to know its origin.

This is because the infiltration is the result of a saturation/saturation of the masonry of the walls or of the slab, which, with no way out, runs down and appears below.

At that moment, it is not even possible to know whether the water that leaks comes from the sewer or the distribution network.

Points where there can usually be a leak in the bathroom

The weakest points, which can often present problems, are the drains and grouting.

Make a visual inspection of both.

 

Drains must never be dry:

If they are, it is because they have a crack, which is allowing the water to leak out.

But be careful! In little-used bathrooms, drain water can simply evaporate, so don’t rush.

As for the grout, check for flaws in your application. Although they do not guarantee waterproofing, the grouts form a first barrier for water not to infiltrate and must always be intact.

After eventually repairing these defects, if the leak persists, more extensive investigations are needed.

 

Identifying a leak in the bathroom:

A simple technique, and one that can be done by anyone, is to add dye to the water that goes into the sewer.

Thus, if the water from the leak acquires the same color, its origin is confirmed.

If you remain transparent, you will know that the leak is coming from the distribution network.

 

After that, if you don’t have the bathroom plumbing plans, ask the janitor or a neighbor who has recently done some renovations.

Knowing where the pipe passes is critical.

With this information in hand, having a trusted professional will make all the difference. If not, look for specialized companies with proven references.

Lastly, if none of the above evidence is detected, you can call a leak hunting company.

Through electronic equipment, which works by ultrasound, they are able, as long as the source of the leak comes from a water pipe or sewer, to specify its exact location.

Once located, just break and repair.

However, if the source is an infiltration in the floor caused by the lack of waterproofing, only repairs to the waterproofing layer can solve it.

In the midst of all this process, the important thing is not to let the damage to your neighbor and your property The sooner it is resolved, the better for everyone.

Previous

What’s the solution to stuck on “Installing ABS PDF driver in QuickBooks?

3 Things To Check Before Finalizing An Office Space On Rent.

Next
Previous

What’s the solution to stuck on “Installing ABS PDF driver in QuickBooks?

3 Things To Check Before Finalizing An Office Space On Rent.

Next