HOW TO FIX A LEAKING BASIN? LEARN NOW!

| |

HOW TO FIX A LEAKING BASIN? LEARN NOW!

A leaking toilet is a nightmare for anyone. Therefore, knowing how to solve the problem quickly is essential for any professional working in the field of hydraulics.

However, the causes of the leak can be as different as possible. As the toilet has several joining and sealing parts, any problem in one of them can cause the water to leak out of an unsuitable location.

For you to know the main types of leaks and understand how to solve each one of them, we prepared this post. Check out!

Leakage inside the Basin:

This is one of the main villains when it comes to wasting water. As the leak occurs inside the basin itself, it is common for people to only notice the problem when they receive their water bill.

This type of leakage usually happens when the tank cap has problems, preventing water from remaining inside the tank. Thus, it ends up leaking into the basin.

To solve this, it is necessary to change the cap, or else check that the discharge valve is not locking the cap in a very high position, which makes it remain partially open. To do this, adjust the current that pulls the plug or change the sealing seal.

Leakage in the connecting tube:

The connecting tube is the part that connects the water tank to the toilet bowl. When this part is not properly adjusted, leaks can occur. In the coupled box parts, there are two screws in the tank that must be properly fastened to the basin, making the necessary pressure to prevent leakage.

In order to solve this problem, tighten the screws at the same time, or one at a time, turning each one around. This ensures that the tank will be perfectly aligned and properly fitted, preventing leakage into the toilet bowl.

As the connecting tube between the basin and the tank is made of rubber, it can also dry out over time. If the leakage does not stop when tightening the screws, it may be necessary to change the connection tube.

leaking from below:

A wet floor can be a sign that leakage is occurring under the basin. This can only be discovered at the time of downloading. The basin is connected to the floor by two screws. If they are not properly secured, the toilet bowl may leak.

The part that connects the basin to the sewer pipe, on the other hand, has a sealing ring, which can dry out or crack over time. In this case, it is necessary to remove the basin from its place and replace the damaged sealing ring.

Inlet valve problems:

Another situation that can cause problems with leaks is the failure of the water inlet valve. Inside the reservoir tank, there is a float that has the function of closing the valve when the water level is reached. However, if there is any problem, she leaves the toilet to leak. Contact here for Plumbing Services

In order to resolve this, adjust the height of the float so that, upon reaching the correct water level, the inlet valve is closed. If even with adjustment the leakage continues, replace the valve so that it completely seals when the ideal water level is reached.

Importance of always using the ideal Parts:

It is important to emphasize that any repair to a leaking toilet bowl must be made with ideal materials and parts. Trying to improvise can cause serious problems. In this situation, the leak may intensify. In more serious cases, it may even be necessary to change the entire basin or the water reservoir tank.

Before starting the repair, it is important to be sure where the leak is coming from, so that an unnecessary repair is not done while the real problem continues to occur. That way, check all the possibilities and only start the service when everything is very clear.

Previous

Water leak repair: How to do it:

AES Cloud Hosting: Get QuickBooks Cloud Technical Assistance

Next
Previous

Water leak repair: How to do it:

AES Cloud Hosting: Get QuickBooks Cloud Technical Assistance

Next