Canon Pixma IP110 compact printer is all-in-one and wirelessly connects to the computer. To get the best print quality, you must first set it up correctly. It is therefore important to understand the Canon IP110 setup process.
How do you set up Canon Pixma IP110 Wireless Printer
WPS is the best method to do the Setup Canon ip110. Before you start the setup process, you should consider these conditions. These conditions are:
- The WPS button must be present on the wireless router.
- The WPA (WiFi Protected Access or WPA2 security protocols) must be followed by the network.
Then, follow these steps:
- First, make sure that the printer is on.
- Hold the WiFi button down for a few seconds until the white power indicator starts to flash.
- Hold the WPS button for at least two minutes on your router.
The printer will now search for available networks, and you’ll see the blue WiFi indicator flashing. After the printer successfully connected to the broadcast network, both the while and blue indicators will stop flashing.
Configuration of Network Settings:
You will now need to verify that the printer has been successfully connected to the broadcast network. You can also print the printer’s network settings to confirm this. These are the steps you should follow in order to check this:
- Place the paper in the tray of the printer.
- Hold the button ‘Resume/Cancel’ until the white power indicator flashes six times.
The network information page will then be printed. You will now see that the SSID Service Set Identifier indicates the correct name of your broadcast network.
You will now need to install the driver for your Canon IP110 printer. You can find the Canon official website if you don’t have your installation CD.
How do I install Drivers and Software using CD-ROM?
These steps will guide you through this process:
Start by inserting the CDROM into your CD-ROM drive and running the setup. If the setup screen does not appear, click on ‘This PC’ (or ‘My Computer) and then click on the CDROM. Double-click on the MSETUP4.EXE option.
Tap on the Next button once the initial startup screen has appeared. Next, select the ‘Wireless LAN Connection’ option and click on Next.
To continue, select the ‘Access Point Connection’ option and tap the Next button.
Next, ensure that the printer is on and the while power indicator turned On. Click the Next button. The software will now start searching for available networks. Tap on the Next button to confirm that the “Settings printer couldn’t be found on the List” option has been selected.
It will now initiate the Setup Guide Installation process. To continue, click on the Next button. Next, click on the “Cableless Setup” option.
After the screen displays “Connection via Cableless Setup”, press the WiFi button on the printer until the white power indicator flashes twice. Click Next.
Next, confirm that both the blue WiFi indicator and the white power indicator have started flashing quickly. Tap Next.
Now, click on the “Setting up” button. During setup, the Network Connection was temporarily disabled. Wait. Once the printer has successfully connected to the access point, tap the Next button.
After the screen “Select Your Place Of Residence” appears, choose your country and click the Next button to continue. Next, select your region from the available regions. Click Next.
After the screen displays, select the software you wish to install. Tap on the Next button.
There is no need to worry if you aren’t sure what software you want to install. This software can be uninstalled at any time.
To agree to the license agreement, tap the Yes button when the screen for ‘License Agreement” appears. After that, click the Next button on the ‘Please Allow All Install Wizard processes’ screen.
The software has been installed correctly. Click on the Redetect button if the screen ‘Check Printer Settings’ appears during the installation process. The printer will be searched again. It may take several minutes, depending on your network configuration.
After the screen opens, verify the model name and the SSID of your wireless network before clicking on the Continue button. It will then open the screen ‘Print Head Alignment Recommend’. Click Next.
You will now be able to register your printer. Click on the Next button to register it. Click on the Cancel button to cancel.
Tap on the Agree button to take part in Extended Survey. If it isn’t, click the “Do not agree” option.
Tap on the Execute button to send a test print of your Canon IP110 printer. Click Next.
To complete the setup, tap the Exit button once the message ‘Install completed successfully’ appears on your screen.
That’s it. This concludes the setup canon ip110 .